Summary: These instructions show how to use the Mondopad with the digital projector system in the main conference room.

Quick Setup for a Presentation

1. Press the Display On button on the touch pad (see figure 1), and select Both for what to turn on (see figure 2).
2. Press the Mondopad button when prompted to select a source, and choose Both for where to display.
3. Insert the USB drive with your presentation on it into the side of the Mondopad.
4. Use the wireless keyboard and mouse to give your presentation.

Note: When you turn on the display, the screen will automatically lower into place, do not use the separate screen button that is located near the touchpad.

Shut Down the Projector and Mondopad

1. Press the Display Off button on the touchpad
2. Select Both under what to turn off.

Note: The screen will automatically raise, do not use the separate button to control the screen.

Audio

Audio from the Mondopad is piped through the ceiling speakers, whether or not the projector is on. The Volume knob on the touchpad controls volume (see figure 1), as well as the controls on the Mondopad.

Selecting the Input

Use the touchpad to select Laptop if you want to use a laptop, and then connect the laptop video to the VGA port directly under the projector screen.

Connecting a Laptop

There’s a black and teal HDMI cable on top of the VCR on the MondoPad. To connect a laptop to the projector, unplug the blue HDMI cable on the wall plate behind the MondoPad and plug the teal HDMI cable into that. Plug the other end into your laptop.

To connect a laptop to the MondoPad, connect one end of the teal HDMI cable into HDMI1 on the back of the MondoPad and the other end into your laptop.